How to Rebuild the Entire Front Suspension in your Car or Truck

Көрүүлөр 1 705 689
98% 64 611 821

Learn how to replace the ENTIRE front suspension of your car in this two episode series. First I will show you how to remove the wheel bearing, ball joints, control arms, tie rod, strut, and axle.
The ball joint and wheel bearing has to be pressed out of the knuckle and I have a bunch of tips and tricks to make that easy. The upper control arm ball joint and tie rod can get stuck in the knuckle so I show some tricks on how to easily remove that. The rest of the suspension parts are pretty simple to remove and replace.
NEXT EPISODE: kgvid.com/video/video-V_g1-WHD4rw.html
Tools and Products:
Mevotech Suspension Parts: amzn.to/2VKrmfr
Rust Paint: amzn.to/2Dg5yAV
Impact gun: amzn.to/2It3KIo
Torque Wrench: amzn.to/2UO2yFY
Bearing Press: amzn.to/2Gh8tv3
Ball Joint Puller: amzn.to/2P2wmcH
Slide Hammer: amzn.to/2URoqAe
Ball Joint Press: amzn.to/2UTxEvR
4lb Hammer: amzn.to/2GhZ06A
Vice: amzn.to/2IfqPyV
→ Become a ChrisFix Subscriber: kgvid.com/u-paintballoo7
→ Instagram: instagram.com/chrisfixit
→ Facebook: facebook.com/chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: kgvid.com/u-ChrisFix
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Машиналар жана унаалар

күнү жарыяланды


2019-ж., 12-апр.



жүктөп алуу:

Жүктөлүп берилүүдө.....

Төмөнкүгө кошуу:

Менин ойноо
Кийинчерээк көрөм
Жорумдар 6 790
ChrisFix 11 күн мурун
Did you guys get notified by KGvid that the video was posted? Also when you watched the video, was there a screen that said "this video was flagged by the KGvid community and may be offensive" or something like that? Just wanted to check because I had issues last night which is why I had to postpone publishing the video. I hope it's all fixed and you guys learn a lot from the video! Stay tuned for the next video and then for a video that, well, covers a life changing event ;) Also for those asking why I am wondering, here is what happened last night when I went to publish: instagram.com/p/BwI-VOhFkt2/
Lurking Shadow
Lurking Shadow Күн мурун
Where did you find the steering and suspension kit I would to do the same for my car
Its Dudster
Its Dudster 2 күн мурун
Its fixed
UdaMesican 2 күн мурун
No I was not notified, glad to see it though this is going to be an upcoming project!
Kaitlin Leung
Kaitlin Leung 3 күн мурун
ChrisFix p
slapopimp 3 күн мурун
+Caleb Peach Simple... repair shops are offended when trade secrets are shared with DIYers that save loads of $$$ not going to their shops!.
#Madesh Madesh
#Madesh Madesh 2 саат мурун
who watches this cause its satisfying but doesn't do anything.
Daniel Rowell
Daniel Rowell 6 саат мурун
Hey Chris, I enjoyed your video, and you have a new subscriber. What paint did you use? As well as the silver paint? Looks great, and I want to use it on my trucks suspension.
Josh I.
Josh I. 7 саат мурун
Can you do a video on leaf springs?
Tom Tissier
Tom Tissier Күн мурун
Super boulot même si la barrière de la langue est un peu compliqué 👍
Alf Күн мурун
nice vid dude
Emilio Arredondo
Emilio Arredondo Күн мурун
So anyone know how to get the rest of that bearing off the hub at 16:10? Or just leave it on there and pretend it was never there?
Samuel Golden
Samuel Golden Күн мурун
This was incredibly satisfiying
Robloxian Bigtn12345
Robloxian Bigtn12345 Күн мурун
How to replace trunk???? Mine is partly ripped off
coleswaggins 6 саат мурун
Robloxian Bigtn12345 man, come on.
Jürgen Siefert
Jürgen Siefert Күн мурун
great tutorial, was very helpful for me and my honda 👍👍👍
Devesh Tewary
Devesh Tewary Күн мурун
8:48 the way the rust flies off is smooth...
Curious Betsy vlogs
Curious Betsy vlogs Күн мурун
Kind of ironic that I’m currently doing this on my skylark with 47 year old original suspension. If you think that’s bad I think half a century old original suspension is just a bit worse lol it was a challenge just to drive it normally
Doddy Cahyo Putra
Doddy Cahyo Putra Күн мурун
Neat and great work lads! Keep it up 👏
Mayur jani
Mayur jani Күн мурун
Great Vid informative as always. Just got to say they way iv always been taught when hammering or pushing out bearing \ bushes is to clamps or secure as close as possible to what your trying to remove. allowing the force to go where you want it with risking bending anything. just thought i would put that out there. Keep up the good work, you always keep your content interesting . :)
Hazshep24 2 күн мурун
out with the old ( ͡° ͜ʖ ͡°) AND IN WITH THE NEW (ノಠ ͜ʖ ಠ) ノ
HK K 2 күн мурун
Very detailed and informative video. Great job!
Nero_Bacura77 2 күн мурун
Also you should find a fiero to play with.
Nero_Bacura77 2 күн мурун
Drift car or pro mod goo lol
Jonathan Gray
Jonathan Gray 2 күн мурун
I wonder if the haters can do 1/3 of what you can do Chris. A half means they will not. 3/4 means their lazy. Now all the haters can go to hell.
LIN HAO 2 күн мурун
Love your sawing screws to flat heads method.
FPSKoda4 2 күн мурун
Does anyone wish that chrisfixes videos never end?
Fuson Yu
Fuson Yu 2 күн мурун
Dammmm I love your video to help me to learn those techniques. Thanks
Fred Garvin
Fred Garvin 2 күн мурун
You have 4.8M subs, don't you think you can rent some garage space and work out of the weather?
Rodrigo C C
Rodrigo C C 2 күн мурун
I remember this car when it came out... loving this honda series, and your videos are awsome. Made me want to buy a used truck pick-up and make usable in daily... 🤙🏻👏🏻🙌🏻
Christopher Gamer
Christopher Gamer 2 күн мурун
Chrisfix keep up the amazing good work and i can't wait to see the turbo kit install in the car.
ChrisFix 2 күн мурун
Thanks a lot
Keith Sanders
Keith Sanders 2 күн мурун
Great video! I am pumped and ready to “fix it like Chris”!
ChrisFix 2 күн мурун
OG Bandino
OG Bandino 2 күн мурун
Chris, would this tutorial still be relatively the same if my car is all wheel steering and all wheel drive? Or would there be too many differences
ChrisFix 2 күн мурун
Basically the same. Actually since it’s all wheel drive and all wheel steering, the rear will be just like the front too!
Xanxツ 2 күн мурун
remember to lubricate and penatrate properly
carter judkins
carter judkins 2 күн мурун
I really want to know if that’s actual black paint or something else cause it looks thicker than actual paint
Its Dudster
Its Dudster 2 күн мурун
Wheres the puberty at?
decoder55killer 2 күн мурун
I nutted :v
H gamer lt
H gamer lt 2 күн мурун
KDM TRAP 2 күн мурун
Who would of thought somebody with marine Biology degree would make car videos
Марк Герасимов
Марк Герасимов 2 күн мурун
Just say that you like to cut rusty screws. Becuase if you are using pozidriv bit to unscrew phillips head you are effin idiot.
artdeco101010 2 күн мурун
Thanks for posting this, very helpful to see how these should be done.
GROUCHY OLD MAN 2 күн мурун
Prefer flat black in wheel well
Shepherd Wolf
Shepherd Wolf 2 күн мурун
Oh wow! I forgot about the ChrisFix decal on the valve cover! I need to go back to that video!
GROUCHY OLD MAN 2 күн мурун
Q: Doesnt spraying off the wheel well introduce water into the trans via the missing axle inlet?
GROUCHY OLD MAN 2 күн мурун
Stack your spare on top of the tire for better safety backup
Steve Huddleston
Steve Huddleston 2 күн мурун
@ChrisFix Which specific products did you use for the "silver rust paint" and the "thick black paint".
po123gsxr 15 саат мурун
i was wondering the same thing. the link in the description gives several examples but didn’t seem like it was what he used
pipefighter 2 күн мурун
Nice video mr. !
Robert Brumley
Robert Brumley 2 күн мурун
Instead of going through all that crap, why not just buy a new car? Those old cars aren't worth anything no matter how much money you put into it, you will never get what you put into it.
ChrisFix 2 күн мурун
I have less than $1k into the car including the price and it’s worth $1500. Plus they don’t make cars like this anymore and it’s a good vehicle to mess around with.
Luis Piedra
Luis Piedra 2 күн мурун
Can you give an estimate at how much it costs to replace the entire suspension with quality parts?
Luis Piedra
Luis Piedra Күн мурун
+ChrisFix well mine is a 2000 prelude which Is almost similar but just not sure which brand would be a good quality for that car that's not overpriced
ChrisFix 2 күн мурун
You need to look it up for your specific car. It varies drastically
Supremium 2 күн мурун
7:15 me beating my meat
alberto escamilla
alberto escamilla 2 күн мурун
i did not see any notification. great video, i was very excited and you make it seem soo easy
shoe112 2 күн мурун
I have a very rusted 2001 nissan maxima, the hood dosnt latch because where the latch part would usually be attached to the frame, there iz now a hole of rust, is it worth saving or should i just start saving up for a newer car
Missy Darjan Spasojevic
Missy Darjan Spasojevic 2 күн мурун
Beautiful video great camera angles! you've came a long way since the older vids you definitely make a great instructive vid. I feel like my autistic son could watch this n do it 👌👏✌
Oscar Cabrera
Oscar Cabrera 2 күн мурун
Awesome video! You always have great content to tackle the job. 🔥
Dexter Tang
Dexter Tang 2 күн мурун
Another reason why those "philips" head screw striped may be due to the fact that they are JIS standard screw head. Similar in design to the common philips head but it inherently is less likely to round off like normal philips does if you use the right JIS screws. Little myth is that all "philips" head screw you see in cars are actually JIS screws. This will save you a lot of headache especially when such screws are used to hold the brake rotors in place.
Jesus Lopez
Jesus Lopez 2 күн мурун
The tire wear isn’t camber wear it’s toe wear. Camber would damage all the tire not just the one side unless your running +18 for that damage. Good video by the way!
bravo3 2 күн мурун
Great stuff, and neat tricks......Thanks.
Lao Han Tun
Lao Han Tun 2 күн мурун
You guys open the bearing seal, the nylon seal, will find that, grease is so little, I would rub in real bearing grease, then close with nylon seal. I saw many cases like that.
Jorenz Tweet
Jorenz Tweet 2 күн мурун
Hi Chris. What do you think is the problem in my front suspension when I hear a sort of dribbling sound when passing by uneven road? Sound is not that audible on potholes.
MOON SHATER 2 күн мурун
Midnights & Mornings
Midnights & Mornings 2 күн мурун
Hey Chris, what school did you go to get your certification?
Joseph Fiumara
Joseph Fiumara 2 күн мурун
Love your videos Chrisfix! Watching your videos I'v learned a lot and saved hundreds of dollars, My neighbors and friends think i'm a mechanic ! hahaa ! Your a great teacher !
ghost GAMING
ghost GAMING 2 күн мурун
VanossGaming is that you 11:03
BDF martin
BDF martin 2 күн мурун
Criss that is a d16 right?
bibi 2 күн мурун
Pouvez vous mettre les sous-titres en français svp
Keyboard Dancers
Keyboard Dancers 3 күн мурун
Old tech is environmentally friendly, creates jobs and prevents drug use.
Nixy Guyaban
Nixy Guyaban 3 күн мурун
7:06 ChrisFix: You're probably gonna do this a bunch of times. 🤣
Greystoke1986 3 күн мурун
Chris, I have enjoyed watching everything that you are doing to the Del Sol!!! What do you have planned for the exterior? Is it a secret or can you reveal a few hints now? Great job Chris!!!
Jesse Renn
Jesse Renn 3 күн мурун
Whoa wait when did he repaint the engine bay? Or was it always that white?
Sly John
Sly John 3 күн мурун
what part of the car are you resting on the jack stands in the beginning?
Abdulazeez Jawad
Abdulazeez Jawad 3 күн мурун
7:05 - when your parents go out for groceries and you're home alone
BooMan TheGhost
BooMan TheGhost 3 күн мурун
KEE LOE 3 күн мурун
Great vid. . . . Still dont have the balls to try it myself.
Bedlamco 3 күн мурун
What is that silver paint
JillyBean860 3 күн мурун
This brought back awful/great memories of my front suspension rebuild. I did this years ago with the help of your past KGvid videos and everything came out great. You are such an inspiration!
jamesws3 3 күн мурун
What penetrating oil have you found to work best? Reviews are all over the place.
TheRustyCracker 3 күн мурун
Has a cordless impact.... nice tools... but uses a hand saw lol.
Chad Bell
Chad Bell 3 күн мурун
They have a tie rod end remover that makes it much easier to remove the inner tie rod. I would suggest this method over the way ChrisFix does it.
Fury_LitBoy 3 күн мурун
Why are there even dislikes on this amazing video ❤❤ Love your content
Marcelo Esquivel
Marcelo Esquivel 3 күн мурун
Buy a silverado plzzzzz
Jonny DIY
Jonny DIY 3 күн мурун
May have been answered already but what kind of Paints were those at the end? Silver was? Never seen silver rust proofing paint. Black was Herculiner type paint or?
Jonny DIY
Jonny DIY 3 күн мурун
Por15? 😁
Haxmaster 3 күн мурун
7:04 Me every night before bed except dealing with another "Hub"
decco 18 саат мурун
chris is obviously a child of god. id have that hub off in 4 pumps
Rodolfo killa
Rodolfo killa 3 күн мурун
Hey Chris we would love a interior deep clean video please. Thanks
Bucking Bronco
Bucking Bronco 3 күн мурун
Now you need to show how to do it with solid axels. Like on an older pickup
Bucking Bronco
Bucking Bronco 3 күн мурун
+ChrisFix how do I message you? I cant find your email?
ChrisFix 3 күн мурун
Winner Winner Chicken Dinner! Message or email me your name and address for some ChrisFix swag for being the first comment!
Matthew Chan
Matthew Chan 3 күн мурун
Still can’t see the next video. Sigh
Jonny Fortin
Jonny Fortin 3 күн мурун
The 2nd part of this video says its unavailable. was it flagged for being to awesome too? keep up the good work man!
nicolas a
nicolas a 3 күн мурун
Second part????????
Jacoboss08 3 күн мурун
What happened to the new video? You said on ig it would be out today.
Merrick Galeener
Merrick Galeener 3 күн мурун
Now just do that three times more
Matt Estes
Matt Estes 3 күн мурун
Do you do a voice over your videos or do you use the microphone on your camera as your doing the work? or do you do both?
ANDREW GEORGE 3 күн мурун
Show us how to clean an engine frim old oil and smuge
alejandro vargas
alejandro vargas 3 күн мурун
David Hommel
David Hommel 3 күн мурун
Here’s a freebie. Easiest way to loosen the axle nut is to put your socket and breaker bar on before removing the tires and put your car in drive or reverse and only move the car about an inch or two. Way easier on your back.
Marco Sin
Marco Sin 3 күн мурун
Hey Chris, so when you paint the suspension areas are you using some special paint or is it just regular paint?
Kingma Jasper
Kingma Jasper 3 күн мурун
I used to be a fan But now ... I'm just an Air conditioner
Joe Lee
Joe Lee 3 күн мурун
I am very sorry
Ash Kumar
Ash Kumar 3 күн мурун
problem facing in Chevrolet captiva 2007 manual, DTC U0073, U0121 and P0500 ,,,,suddenly odometer stops working ,all needles(Temperature, rpm, speed etc.) showing 0 reading , ac stops cooling while blower keep running,reverse gear light stops working and all happen intermittently and all together. Can anybody suggest solution?
Adi Azarov
Adi Azarov 3 күн мурун
Another incredible video
Marc-Antoine 3 күн мурун
7:02 me when I see a brand new front suspension on a Honda
03 Silverado
03 Silverado 3 күн мурун
Who can help me find a website that can give me good suspension parts for a 2003 silvarado 2x4? THANKS
Polo Junior
Polo Junior 3 күн мурун
What’s the name of the paint you use
WhiteStone30 3 күн мурун
Chris: Video next Thursday Next Thursday:....
J. M.
J. M. 3 күн мурун
ChrisFix is posting garbage videos. Honda Civic is not the same as every car. But ChrisFix pretends to know everything and every car. Disgusting.
Joe Lee
Joe Lee 3 күн мурун
youtube is the world of showoff. welcome.
Yogesh More
Yogesh More 3 күн мурун
Hi Chris fix I am looking forward to drifting because I am a pro at it in racing games and I subscribed to your Chanel keep it up🤘🤘
Deivid Georgiev
Deivid Georgiev 3 күн мурун
Make a video with a new throttle body please
Alex Martinez
Alex Martinez 3 күн мурун
Was the paint he used Por-15?
CheckDrive 3 күн мурун
This is the reason why i subscribe your Channels LOVE YOUR VIDEOS BRO FROM INDIA!! 👍👍👍
BMW 7  Full repair. Полный ремонт.
Good Shocks Vs Bad Shocks : 5 Ways To Tell
Көрүүлөр 1 590 506
Full Self-Driving
Көрүүлөр 1 790 911